isometric isometric title scale date dr dwg rev the information contained in this document is propr ietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 100awdp6t1b1m1qeh 2:1 10/6/2010 ST102602 a bma 1 1 with standard locking ring panel without locking ring 2.92 [.115 in] n 10.55 [.415 in] 10.42 [.410 in] 11.43 [.450 in] 12.70 [.500 in] a 19431 released for production 11/11/10 bma pos. 1 pos. 2 pos. 3 switch function on on on 2-3, 5-6 2-3, 5-4 2-1, 5-4 2 1 3 note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material: silver 5. rating: 5a @120vac or 28vdc 2a @250vac 6. electric life: 30,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength: 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. denotes critical parameter. 11. 2002/95/ec (rohs) complaint 12. hardware to be shipped bulk t100000 - hexnut - qty 2 t100011 - lockwasher - qty 1 t100015 - lockring - qty 1 1 2 3 3 circuit: dpdt .67 [.027 in] 1.02 [.040 in] keyway 25 ~ pos. 1 pos. 2 pos. 3 1/4-40 uns-2a threads 5 4 6 4.70 [.185 in] .76 [.030 in] 3.96 [.156 in] 2.03 [.080 in] 1.19 [.047 in] 1.98 [.078 in] 4.83 [.190 in] .76 [.030 in] 8.80 [.346 in] epoxy seal rating 6.10 [.240 in] .85 [.033 in] .55 [.022 in] n 6.35 [.250 in] n 6.35 [.250 in] n 2.38 [.094 in] 6
|